2020 INFINITI QX80 - HomeLink® Universal Transceiver (Type A) (if so equipped)

"This video is copyrighted material of Nissan North America, Inc. and should not be copied, edited, or reproduced without the permission of Nissan.

Your HomeLink® Universal Transceiver’s control buttons are located along the bottom of your rearview mirror.

The system can consolidate the functions of various individual hand-held transmitters to replace devices that operate garage doors, gates, lights or security alarms.

HomeLink® is powered by your INFINITI vehicle’s battery and requires no other power source.

Remember that you’ll need all of your hand-held transmitters, such as your garage door opener, to successfully program HomeLink®.

To get started, clear the HomeLink® memory. Press and hold the two outer buttons. When the LED indicator changes from solid to rapidly flashing, release both buttons. Your HomeLink® is now ready to be programmed.

To begin programming, position the hand-held transmitter 1 to 3 inches away from the HomeLink® surface.

Now, using both hands, simultaneously press and hold both the HomeLink® button you want to program and the hand-held transmitter button until the indicator light flashes, changing from a slow blink to a rapid blink.

When the indicator light flashes rapidly, both buttons may be released. The rapidly flashing light indicates that the device has been successfully programmed.

If the indicator lamp lights up red, repeat the programing procedure for the corresponding button on the rear-view mirror. When doing so, vary the distance between the hand held transmitter and the rear-view mirror. If the garage door system uses a rolling code, you will also have to synchronize the garage door system with the integrated garage door opener in the rear-view mirror. To do this, put the ignition in the ON position. Leave the vehicle and press THIS programming button. Get into the vehicle and press the previously programmed button on the HomeLink® until the garage door closes. This last step must be performed within 30 seconds of pushing the programming button on the door drive unit.

To activate a programmed device, press and hold the programmed HomeLink® button. If the indicator light is solid, training is complete and your device should activate when the HomeLink® button is pressed and released.

If the indicator light blinks rapidly for 2 seconds and then turns to a solid light, there are additional steps required to program your device. See your Owner’s Manual for more information.

If you have any questions or are having difficulty programming your HomeLink®
buttons, please refer to the HomeLink® website at www.homelink.com or call 1-800-355-3515. For further functions and features, download the HomeLink® app from the website.

Please see your Owner’s Manual for important safety information, system limitations, and additional operating and feature information."