2020 INFINITI QX80 - Power Windows

"This video is copyrighted material of Nissan North America, Inc. and should not be copied, edited, or reproduced without the permission of Nissan.

The power windows function when the ignition switch is placed in the ON position, and for a short time after the vehicle is turned off. The power is immediately canceled if the driver’s or passenger’s door is opened after the ignition switch is placed in the OFF position.

These switches located on the driver’s door panel allow the driver to open or close all windows.

Your vehicle is equipped with Automatic windows. Push the switch down completely and release for the window to fully open. Pull the switch up to the highest position and release and the window will close automatically.

To stop the opening or closing of a window at any point, push or pull the switch in the opposite direction.

Press the window lock button to disable the power window switches on the passenger doors. To return power to these switches, press the window lock button a second time.

If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system.
● Place the ignition switch in the ON position.
● Close the door.
● Open the window completely by operating the power window switch.
● Pull the power window switch up and hold it to close the window, and then hold the switch more than 3 seconds after the window is completely closed.
● Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete.
● Repeat these steps for other windows.

If the power window automatic function does not operate properly after performing the procedure, it is recommended you visit an INFINITI retailer for service.

Please see your Owner’s Manual for important safety information, system limitations, and additional operating and feature information."